TP-Link MC100CM 10/100M RJ45 to 100M Multi-Mode SC Full Duplex up to 2km Fibre Converter
Product Code:
8TP10010764
Pack Of
1
The MC100CM is a media converter designed to convert 100BASE-FX fibre to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is designed for use with multi-mode fibre cable utilizing the SC-Type connector. The MC100CM supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.
- General
- The MC100CM is a media converter designed to convert 100BASE-FX fibre to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is designed for use with multi-mode fibre cable utilizing the SC-Type connector. The MC100CM supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.
| Colour | Black |
| Standards | IEEE 802.3 IEEE 802.3u IEEE 802.3x |
| Wave Length | 1310nm |
| Max Power Consumption | 2.5W |
| Connection 1 | 100M SC/UPC port |
| Connection 2 | 100M RJ45 port (Auto MDI/MDIX) |
| Complies with 802.3u 10/100Base-TX, 100Base-FX standards |
| Extends fibre distance up to 2km |
| Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely |
| Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port |
×